pH V1
FOR 2-WIRE SYSTEM
Your sensor is ideally accommodated in the immersion fitting. This fitting ensures optimum measuring conditions.
Immersion Assembly Type IMA-ICT 2
Immersion fitting to hold one inductive conductivity sensor of type ICT 2.
| Material |
Fittings: Stainless steel 1.4404 Seal: FKM |
| Max. temperature | 125 °C |
| Max. pressure | 10 bar |
| Length when fitted | 1 m |
| Immersion lance diameter | 70 mm |
| Flange | Stainless steel flange DN 80 PN 16 |
Dimensions Table: Flange
| Flange | DN 65/PN 16 |
| Ø D | 200 mm |
| Ø K | 160 mm |
| Ø d2 | 8 x 18 mm |
| b | 20 mm |
| Ø a | 63.5 mm |
| Screws | M 16 |
Adaptation to processes through flange installation in tank from top.
Immersion Assembly Type TA-LM
Immersion fitting to hold one conductivity sensor of type LM or LMP with M 28 thread for side fastening with pipe clips (2 included in the scope of delivery) or with union nut/collar bush/screw-in part for fastening at top of tank cover.
Note: Union nut and screw-in part are to supplied by the customer (standard parts).
| Material | PP |
| Max. temperature | 70 °C |
| Enclosure rating | IP 68 |
| Max. pressure | 5.0 |
| Immersion lance diameter | 32 mm |
| Pipe length | 890 mm |
| Length | Order no. | |
|---|---|---|
| mm | ||
| TA-LM | 890 | 1020632 |
| Headed bush d50 | – | 1020634 |
| Extension tube 1000 | 910 | 1020633 |
PP Immersion Assembly Type lPHa 1-PP
Immersion fitting for holding one sensor (e.g. pH, ORP) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is sized so that either pH or ORP transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 40 mm. Immersion depths of 1 and 2 m are offered, however customers can independently lengthen or shorten the immersion pipe. The fitting head contains two cable connectors; measuring lines of 3-7 mm diameter can be led out.
Note: Measuring lines are not included in the scope of delivery.
| Material |
Probe housing material: PP Seal material: FKM |
| Max. temperature | 80 °C |
| Pressure | Installation at atmospheric pressure |
| Immersion depth | Max. 1, or 2 m; variable |
| Immersion lance diameter | 40 mm |
Dimensions Table: Flange
| Fixed flange | DN 40 |
| Hole circle Ø K | 110 mm |
| Bolts | 4 x M16 |
| Thickness d2 | 18 mm |
| Diameter Ø D | 150 mm |
| Length when fitted | Order no. | |
|---|---|---|
| m | ||
| IPHa 1-PP | 1 | 1008600 |
| IPHa 1-PP | 2 | 1008601 |
Other materials available on request.
FKM = Fluorine Rubber
Accessories for Fitting Type IPHa 1
| Order no. | |
|---|---|
| Immersion pipe mounting for IPHa 1-PP | 1008624 |
| Clamped threaded connector with fixed flange DN 40 according to DIN 2642 for lPHa 1-PP | 1008626 |
| Clamped threaded connector for welding connection for lPHa 1-PP | 1008628 |
| Protective (weatherproofed) cover for assembly head for IPHa 1-PP | 1008630 |
| Water-retaining basin for IPHa 1-PP | 1008632 |
| Weatherproof cover PP | 1023368 |
PP Immersion Assembly Type lPHa 3 -PP
Immersion fitting to hold up to three sensors (e.g. pH, ORP, temperature) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is dimensioned so that up to three pH, ORP or temperature transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 75 mm. Immersion depths of 1 and 2 m are offered, however customers can independently shorten the immersion pipe. The fitting head contains four cable connectors; measuring lines of 3-7 mm diameter can be led out.
Note: Measuring lines are not included in the scope of delivery.
| Material |
Probe housing material: PP Seal material: FKM |
| Max. temperature | 80 °C |
| Pressure | Installation at atmospheric pressure |
| Immersion depth | Max. 1, or 2 m; variable |
| Immersion lance diameter | 75 mm |
Dimensions Table: Flange
| Fixed flange | DN 65 |
| Hole circle Ø K | 145 mm |
| Screws | 4 x M16 |
| Thickness d2 | 18 mm |
| Diameter Ø D | 185 mm |
| Length when fitted | Order no. | |
|---|---|---|
| m | ||
| IPHa 3-PP | 1 | 1008602 |
| IPHa 3-PP | 2 | 1008603 |
Other materials available on request.
FKM = Fluorine Rubber
Accessories for Fitting Type IPHa 3
| Order no. | |
|---|---|
| Immersion pipe mounting for lPHa 3-PP | 1008625 |
| Clamped threaded connector with fixed flange DN 65 according to DIN 2642 for lPHa 3-PP | 1008627 |
| Clamped threaded connector for welding connection for lPHa 3-PP | 1008629 |
| Protective (weatherproofed) cover for assembly head for lPHa 3-PP | 1008631 |
| Water-retaining basin for IPHa 3-PP | 1008633 |
| Weatherproof cover PP | 1023368 |
PVC Immersion Assembly Type ETS 1 P
Immersion fitting to hold one conductivity, Pt 100, pH or ORP sensor with SN6 plug-in head and PG 13.5 screw-in thread. In addition, a stainless steel rod is integrated as a liquid reference potential.
| Sensor connector (inner) | SN6 connector |
| Signal lead connector (outer) | Coax SN6 male connector |
| Material | Rigid PVC |
| Type of fitting | Clamping flange with mounting plate |
| Immersion depth | Variable |
| Max. temperature | 55 °C |
| Order no. | |
|---|---|
| ETS 1 P | 914950 |
- Reviews
- Can't see what you want ?
This is the product you are interested in but you need a different specification then contact us on