• Prominent Immersion Fittings for Sensors
Prominent Immersion Fittings for Sensors - Image 1

Prominent Immersion Fittings for Sensors

₱0.00
Out of stock

Description

Can’t see what you want?

pH V1

FOR 2-WIRE SYSTEM

Your sensor is ideally accommodated in the immersion fitting. This fitting ensures optimum measuring conditions.

Immersion Assembly Type IMA-ICT 2

Immersion fitting to hold one inductive conductivity sensor of type ICT 2.

Material

Fittings: Stainless steel 1.4404

Seal: FKM

Max. temperature125 °C
Max. pressure10 bar
Length when fitted1 m
Immersion lance diameter70 mm
FlangeStainless steel flange DN 80 PN 16

Dimensions Table: Flange

FlangeDN 65/PN 16
Ø D200 mm
Ø K160 mm
Ø d28 x 18 mm
b20 mm
Ø a63.5 mm
ScrewsM 16

 

Adaptation to processes through flange installation in tank from top.

  • pk_6_094

    pk_6_094

Immersion Assembly Type TA-LM

Immersion fitting to hold one conductivity sensor of type LM or LMP with M 28 thread for side fastening with pipe clips (2 included in the scope of delivery) or with union nut/collar bush/screw-in part for fastening at top of tank cover.

Note: Union nut and screw-in part are to supplied by the customer (standard parts).

MaterialPP
Max. temperature70 °C
Enclosure ratingIP 68
Max. pressure5.0
Immersion lance diameter32 mm
Pipe length890 mm
LengthOrder no.
mm
TA-LM8901020632
Headed bush d50–1020634
Extension tube 10009101020633

  • pk_6_053

    pk_6_053

  • pk_6_078

    pk_6_078

  • pk_6_079

    pk_6_079

PP Immersion Assembly Type lPHa 1-PP

Immersion fitting for holding one sensor (e.g. pH, ORP) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is sized so that either pH or ORP transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 40 mm. Immersion depths of 1 and 2 m are offered, however customers can independently lengthen or shorten the immersion pipe. The fitting head contains two cable connectors; measuring lines of 3-7 mm diameter can be led out.

Note: Measuring lines are not included in the scope of delivery.

Material

Probe housing material: PP

Seal material: FKM

Max. temperature80 °C
PressureInstallation at atmospheric pressure
Immersion depthMax. 1, or 2 m; variable
Immersion lance diameter40 mm

Dimensions Table: Flange

Fixed flangeDN 40
Hole circle Ø K110 mm
Bolts4 x M16
Thickness d218 mm
Diameter Ø D150 mm

 

Length when fittedOrder no.
m
IPHa 1-PP11008600
IPHa 1-PP21008601

Other materials available on request.

FKM = Fluorine Rubber

Accessories for Fitting Type IPHa 1

Order no.
Immersion pipe mounting for IPHa 1-PP1008624
Clamped threaded connector with fixed flange DN 40 according to DIN 2642 for lPHa 1-PP1008626
Clamped threaded connector for welding connection for lPHa 1-PP1008628
Protective (weatherproofed) cover for assembly head for IPHa 1-PP1008630
Water-retaining basin for IPHa 1-PP1008632
Weatherproof cover PP1023368

  • pk_6_080

    pk_6_080

  • pk_6_094_flansch

    pk_6_094_flansch

PP Immersion Assembly Type lPHa 3 -PP

Immersion fitting to hold up to three sensors (e.g. pH, ORP, temperature) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is dimensioned so that up to three pH, ORP or temperature transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 75 mm. Immersion depths of 1 and 2 m are offered, however customers can independently shorten the immersion pipe. The fitting head contains four cable connectors; measuring lines of 3-7 mm diameter can be led out.

Note: Measuring lines are not included in the scope of delivery.

Material

Probe housing material: PP

Seal material: FKM

Max. temperature80 °C
PressureInstallation at atmospheric pressure
Immersion depthMax. 1, or 2 m; variable
Immersion lance diameter75 mm

Dimensions Table: Flange

Fixed flangeDN 65
Hole circle Ø K145 mm
Screws4 x M16
Thickness d218 mm
Diameter Ø D185 mm
Length when fittedOrder no.
m
IPHa 3-PP11008602
IPHa 3-PP21008603

Other materials available on request.

FKM = Fluorine Rubber

Accessories for Fitting Type IPHa 3

Order no.
Immersion pipe mounting for lPHa 3-PP1008625
Clamped threaded connector with fixed flange DN 65 according to DIN 2642 for lPHa 3-PP1008627
Clamped threaded connector for welding connection for lPHa 3-PP1008629
Protective (weatherproofed) cover for assembly head for lPHa 3-PP1008631
Water-retaining basin for IPHa 3-PP1008633
Weatherproof cover PP1023368

  • pk_6_081

    pk_6_081

  • pk_6_094_flansch

    pk_6_094_flansch

PVC Immersion Assembly Type ETS 1 P

Immersion fitting to hold one conductivity, Pt 100, pH or ORP sensor with SN6 plug-in head and PG 13.5 screw-in thread. In addition, a stainless steel rod is integrated as a liquid reference potential.

Sensor connector (inner)SN6 connector
Signal lead connector (outer)Coax SN6 male connector
MaterialRigid PVC
Type of fittingClamping flange with mounting plate
Immersion depthVariable
Max. temperature55 °C
Order no.
ETS 1 P914950

  • pk_6_064

    pk_6_064
SKU: 78782659
Category: ,
Tags: ,

This is the product you are interested in but you need a different specification then contact us on.

0917 310 6228

Related Products

You might also be interested in these products